X-431 X-Prog3 /Topon T-Ninja Box - Immobilizer and Key Programmer: Add-On for Launch, ThinkCar & TopDon
TOPDON T-NINJA BOX / Launch X-PROG 3
Immobilizer & Key Programmer for X431 V, X431 V+, X431 PAD V, PAD VII, TOPDON, ThinkCar,
YOUR CHOICE FOR COMPATIBILITY & COVERAGE
With the T-Ninja Box, you get the most Comprehensive Vehicle Models Database of US, Euro, and Asian brands, such as Volkswagen, Audi, Skoda, SEAT, BMW, Mercedes-Benz, Toyota, and others. This cutting-edge programming tool is compatible with the most prominent ECU, MCU, and EEPROM Manufacturers. Its coverage includes Atmel, ST, MicroChip, Renesas R32C, NEC, and much more.
CONTINUOUS UPGRADES & TIMELY SUPPORT
TOPDON constantly updates its database to include more vehicle models and new functions to offer users tools that are reliable, durable, and will not turn obsolete over time.
TOPDON also offers timely and high-quality technical support to assist customers when performing complex functions with their TOPDON tools. Our tech support agents are always ready to provide up-to-date and clear operating instructions and guide users through any technical issues.
EFFICIENT, FAST, ACCURATE AND MULTI-FUNCTIONAL
1- Reading and writing the fourth generation of Volkswagen UDS engine chip.
2 - Volkswagen and Audi MQB platform vehicles' engine replacement.
3 - Instrument and steering column replacement (Unnecessary to access the original engine data. Instead, it can be read directly from the key).
4 - Fourth-generation Audi models' EZS, comfort control module, and KESSY chip replacement. (Available even if all keys are lost).
5 - Fifth-generation Audi gearbox replacement.
6 - Supports more than 170 Bosch, more than 20 Siemens engine ECU, 20 kinds of transmission ECU free shell BENCH mode copy.
CUTTING-EDGE ADVANCED FEATURES
The T-Ninja Box supports a wide array of advanced features, allowing its users to access important functions, including Mercedes-Benz infrared key matching, lock reading and writing, three generations of engine gearbox computer brush empty, four generations of engine computer cloning, four generations of FDCT and 9-speed gearbox computer copy.
LIMITLESS CAPABILITIES
This advanced programming device works on the most common IMMO systems, such as Engine, Automatic Transmission, Instrument, CAS, Body, and Lock Systems.
COMPATIBLE WITH THE TOPDON PHOENIX SERIES
The T-Ninja Box is compatible with the Phoenix Series of Scanners, the perfect add-on tool to further expand your diagnostic capabilities! This easy-to-use tool offers a simple and intuitive connection with no binding needed! It supports BMW engine replacement matching or copy, IMMO system replacement matching, key matching, transmission computer wiping empty and more.
1. All-in-One Key Programmer. Integrates Multiple Function Models
2. Reads & Writes Most Engine/ Gearbox ECUs Without Disassembling the Shell
3. Supports VW/ AUDI MQB Platform Engine ECU Replacement or Cloning (Read engine ECU data directly from the key).
4. Works with Reprogramming Device to Backup/ Restore Programming Data (For Bosch/Siemens engine ECU).
5. Enables Reading/ Writing EEPROM, On-Board MCU, and BMW CAS4+/ FEM Chips, Mercedes-Benz Infrared Keys, Generating Special Keys, Reading BMW Engine ISN Code.
TOPDON T-NINJA BOX / XPROG3 Advantages
1. Supports VW/AUDI MQB platform engine ECU replacement or cloning (Read engine ECU data directly from the key).
2. Supports VW/AUDI MQB platform gearbox ECU replacement or cloning.
3. Supports ECU replacement for the fifth-generation of Audi (0AW/0B5) gearbox.
4. Supports reading, writing & cloning the ECU for the fourth-generation of VW UDS engine.
5. Supports BMW E chassis 8HP gearbox ECU reprogramming to empty.
6. Works with reprogramming device to backup/restore programming data (For Bosch/Siemens engine ECU).
Supported Brands
VW, Audi, Skoda, SEAT, BMW, Mercedes-Benz, Toyota… (updates will continue to roll out additional support)
Compatible With Multiple X-431 Series Diagnostic Tablet:
X431-Throttle, X431-Throttle III, X431-Torque, X431-Torque III, X431-Turbo, X431-PAD II AE
X-431 PRO GT, X-431 PRO V4.0, X-431 PRO 3 V4.0, X-431 PRO 5, X-431 PAD III V2.0, X-431 PAD V, X-431 PAD VII
TopDon Phoenix Plus
ThinkCar S10, ThinkCar S20 Platinum, ThinkCar S20 Richard Petty Edition.
X-PROG3 Features:
1. Compatible with X-431 series diagnostic scanners, X-PROG 3 enables reading/writing EEPROM, on-board MCU and BMW CAS4+/FEM chips, Mercedes-Benz infrared keys, generating special keys, reading BMW engine INS code.
2. Supported brands: VW, AUDI, SKODA, SEAT, BMW, MERCEDES-BENZ, TOYOTA, etc. More models continue to be updated.
3. Supported systems: Automatic Transmission, Instrument System, CAS, Body System, Lock System, etc.
4. Compatible with: X-431 PRO GT, X-431 PRO V4.0, X-431 PRO 3 V4.0, X-431 PRO 5, X-431 PAD III V2.0, X-431 PAD V, X-431 PAD VII, TOPDON Phoenix Plus, ThinkCar S10, ThinkCar S20 and more!
5. Reads & writes most Engine/Gearbox ECUs without disassembling the shell
TOPDON T-NINJA BOX / XPROG 3 Core Functions
1. Integrated the functions of key matching/copy, anti-theft IC reading & writing, and ECU reading & writing, etc.
2. Supports common ECU/MCU/EEPROM major manufacturers, with over 1200 product models, and constantly updating.
3. Supports ECU replacement for all lost without disassembly for VW/AUDI non-35XX instrument (it can be read directly through independent harness without removing the IC).
4. Supports ECU replacement for the fourth-generation of VW/AUDI engine;
5. Supports ECU replacement for the fifth-generation of VW/AUDI Bosch and Siemens engines.
6. Supports the all lost and replacement for the fourth generation of AUDI EZS, comfortable ECU, and KESSY IC.
7. Supports the BMW F and G chassis 8HP gearbox ECU reprogramming to empty.
8. Supports the BMW CAS4/CAS4+ module replacement.
9. Supports the ECU cloning and replacement for BMW Siemens engines.
10. Erase the password for Mercedes-Benz engine and gearbox within 3S.
11. Add the function of calculating the password for the Mercedes-Benz key within 1 minute.
Supported Chip Brands:
It supports common mainstream ECU MCU manufacturers, with more than 1,000 product models, and they are continuously being updated.
Supported EEPROM Brands:
It supports common mainstream EEPROM manufacturers, with nearly 1,000 product models, and they are continuously being updated.
XPROG3 Operation Connection:
Connection method 1: Directly connect to OBD16 for key matching, data reading and writing, etc
Connection method 2: Place the anti-theft EEPROM or MCU chip in the chip burning socket, and then insert the chip burning socket into the slot of the immobilizer programmer locker and lock it to realize the data interaction between the IC anti-theft chip and the diagnostic host
Connection method 3: After removing the ECU from the car, connect the anti-theft ECU pin to the DIY slot of the immobilizer programmer through the cable to realize the data interaction between the anti-theft ECU and the diagnostic host.
